ABB DCS800

Mains supply

Voltage - power part, 3-phase
Voltage Deviation
Rated Frequency

230V to 1000V in acc. with IEC 60038, higher voltage is available on request. +/- 10% continuous 50Hz or 60Hz

Voltage - field exciter
Voltage deviation
Frequency range

110 to 500V, 1 ph for units 6...50Adc +/- 10% continuous 50Hz or 60Hz

Voltage - aux. supply, 1-phase
Voltage deviation
Frequency range

115V / 230V in acc. with IEC 60038
-15% / +10%
45Hz to 65Hz

Voltage - fan supply

115V/230V, 1 ph ... 690V, 3 ph depending on frame sizes.

DC Outputs

DC voltage

The maximal DC voltage is depending on supply voltage and converter type (2Q or 4Q). If a 2Q unit is also used in regenerative mode, please use also the values of the 4Q column. The following classes are available with the recommended DC voltage:

DC current

According rated current of frame sizes:

DC field voltage

Max. field voltage 110V to 500V, depending on supply voltage and field exciter unit.

6/15/20/25A - Field exciter onboard of D1/D2/D3/D4

25A Internal with FEX-425-INT for D5 as option

35A Field exciter DCF80x (external)

> 35A on request

DCS500 and DCS600 products

for detailed data please see DCS500B System Description or DCS600 System Description

Tools for DCS800

0DCS800 panel

The control panel communicates with the power converter DCS800

• Large display
• Two soft keys
• Help function
• Multilingual
• Startup Assistant
• Shows actual values in physical values
• Copy and compare function for parameters

DriveWindow light

DriveWindow light (short DWL), version 2.6 onwards, is an easy-to-use start-up and maintenance tool for DCS800 under WindowsTM 2000/XP. The connection to the drive needs a free serial port from PC and standard RS232 cable. All DCS800 drives are equipped with DriveWindow Light.

The tool has the following features:

• Viewing and setting parameters in offline and online mode
• Editing, saving and downloading parameters
• Comparing parameters
• Graphical and numerical signal monitoring
• Local operation
• Start-up assistant (add-on for DCS800)
• DWL AP tool (add-on for DCS800)

DriveWindow light

DriveWindow, version 2.2 onwards for DCS800, is the start-up and maintenance PC program for DCS600, which can be run on laptop PC under Windows 2000TM or Windows XPTM. CD ROM drive (for installation) and PCMCIA slot are necessary. The Drive Window package contains the installation CD ROM, NDPA-02 PC card, NDPC-12 connector between PC card and optical fiber cable and 10m plastic optical fiber cable. DCS800 requires the SDCS-COM-8x option. A monitoring network connection is also possible.

The tool has the following features:

• Parameter programming
• Feedback display and analysis
• Local operation
• Parameter uploading, saving as file and downloading, comparing with
• Saved files
• Fault detection for trouble-shooting
• Monitoring and data logger
• Fault logger
• OPC interface
  
  

ControlBuilder DCS800

Tools for DCS500 and DCS600

CDP-312 panel

DDCTool 4.0

DriveWindow

The PC program DriveWindow is the start-up and maintenance PC program for e.g. DCS600, which can be run on laptop PC under Windows 2000TM or Windows XPTM. CD ROM drive (for installation) and PCMCIA slot are necessary. The Drive Window package contains the installation CD ROM, NDPA-02 PC card, NDPC-12 connector between PC card and optical fiber cable and 10m plastic optical fiber cable. A monitoring network connection is also possible.